A. The scale of the sketch plan shall be not less than one inch (1") equals one hundred  feet (100').* Some variation from this will be acceptable in the case of large subdivisions provided the plans and design are clearly legible. Maps shall include the true north points, name of the subdivision, name of the county, township, range, principal meridian section, and quarter section; block and lot numbers. In the case of large subdivision requiring more than two sheets at such a scale, a total area plan showing the total area on a single sheet at an appropriate scale shall also be submitted.

B. The dimensions of each and every map submitted shall be twenty-four (24) inches by thirty-six (36) inches. In the case of multiple sheets, a key map showing the relationship of the individual sheets shall be provided on each sheet.

_________

*Note: A different scale can be used if approved in advance by the Director of the Department of Planning and Development.