17.126.030  Development Requirements.

  1. Residential densities shall be as established by the development plan as approved by the Board of County Commissioners in accordance with the Design Standards as outlined in Section 17.126.130 of this Chapter.
  2. Minimum lot sizes for residential and non-residential uses shall be as established by the development plan as approved by the Board of County Commissioners in accordance with the Design Standards as outlined in Section 17.126.130 of this Chapter.
  3. The interior and exterior boundaries of the PUD District shall have building setbacks as established by the Development Plan as approved by the Board of County Commissioners in accordance with the Design Standards as outlined in Section 17.126.130 of this Chapter and Building and Fire Code Regulations.
  4. Maximum height of any buildings or structures shall be as established by the development plan as approved by the Board of County Commissioners but in no event shall any building or structure exceed sixty (60) feet in height.  In the case of telecommunications towers as the need for the same arises, a maximum height of two hundred (200) feet may, in the discretion of the Board of County Commissioners, be permitted.
  5. Minimum area to be considered for rezoning to the PUD District shall be one (1) acre or where five (5) or more dwelling units are proposed.