17.52.160 Performance standards.

A. No more than one mobile home shall be permitted on each platted lot.
B. Each mobile home in a mobile home subdivision shall comply with the Colo. State Housing Board’s State Factory-Built Housing Construction Code, more commonly known as the ANSI Standard A119.1 and C.B.H.B., revision and amendments thereto, or the Federal Mobile Home Construction and Safety Standards.
C. Accessory buildings and structures to a mobile home in a mobile home subdivision are limited to garages, awnings, cabanas, ramadas, storage structures, patios, carports, fences, windbreaks and porches. All accessory buildings and structures shall conform to the building code of the County of Pueblo and appropriate sections of this Code. Accessory buildings or structures not adequately covered by either the building code or this Code shall be subject to the provisions of the National Fire Protection Association’s Standard for Mobile Home Parks, "Mobile Home Accessory Buildings and Structures," NFPA No. 501A (ANSI A119.3).
D. Storage is not permitted beneath the mobile home, except when located upon a basement. All basements shall be approved by the Building Inspector.
E. All mobile homes in a mobile home subdivision shall have their wheels, axles and removable towing apparatus removed and be secured to a permanent foundation. Methods of securing and foundation designs shall be approved by the County Building Inspector.
F. All mobile homes, including non-removable towing apparatus in a mobile home subdivision, shall be skirted with an impervious material which is compatible with the mobile home exterior and impedes the passage of wind beneath the mobile home. A removable partition or section at least eighteen (18) inches by thirty-six (36) inches shall be located in the skirting of all mobile homes, except those with basements, as to provide convenient access beneath for the inspection and repair of utilities.